Rotational pneumatic piston chamber based on ideal gas law
The Rotary Pneumatic Piston Chamber block models a pneumatic rotary piston chamber based on the ideal gas law and assuming constant specific heats. Use this model as a building block for pneumatic rotational actuators. The piston can generate torque in one direction only, and the direction is set by the Chamber orientation parameter.
The continuity equation for the network representation of the piston chamber is
|G||Mass flow rate at input port|
|V0||Initial chamber volume|
|D||Piston displacement (volume per unit angle)|
|p||Absolute pressure in the chamber|
|R||Specific gas constant|
|T||Absolute gas temperature|
The energy equation is
|q||Heat flow due to gas inflow in the chamber (through the pneumatic port)|
|qw||Heat flow through the chamber walls (through the thermal port)|
|cv||Specific heat at constant volume|
|cp||Specific heat at constant pressure|
The torque equation is
Port A is the pneumatic conserving port associated with the chamber inlet. Port H is a thermal conserving port through which heat exchange with the environment takes place. Ports C and R are mechanical rotational conserving ports associated with the piston case and rod, respectively. The gas flow and the heat flow are considered positive if they flow into the chamber.
The gas is ideal.
Specific heats at constant pressure and constant volume, cp and cv, are constant.
Specify the effective piston displacement, as volume per unit angle. The default value is .001 m^3/rad.
Specify the initial piston angle. The default value is 0.
Specify the volume of gas in the chamber at zero piston position. The default value is 1e-5 m^3.
Specify the initial pressure in the chamber. This parameter specifies the initial condition for use in computing the initial state at the beginning of a simulation run. For more information, see Initial Conditions Computation. The default value is 101235 Pa.
Specify the initial temperature of the gas in the chamber. This parameter specifies the initial condition for use in computing the initial state at the beginning of a simulation run. For more information, see Initial Conditions Computation. The default value is 293.15 K.
Specify the direction of torque generation. The piston generates torque in a positive direction if this parameter is set to 1 (the default). If you set this parameter to 2, the piston generates torque in a negative direction.
The block has the following ports: