Agilent N603x Series Arbitrary Waveform Generator Instrument Driver
| Date | Contributor | Description | Rating |
|---|---|---|---|
| 22 Dec 2010 | The Instrument Control Team |
The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA. This links to an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. This driver is for use with Agilent N603z series arbitrary waveform generators. For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument |
| Tag | Applied By | Date/Time |
|---|---|---|
| n6033a | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| n6032a | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| n6031a | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| n6030a | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| instrument driver | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| arbitrary waveform generator | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| ivi | The Instrument Control Team | 22 Dec 2010 at 9:30am |
| agilent | The Instrument Control Team | 22 Dec 2010 at 9:30am |